It has built-in CAD compatible with AutoCAD OEM 2024. Saves to DWG. Versatile and powerful, it is an indispensable tool within the technical office.
Software with an integrated CAD engine dedicated to topographic surveying, design, and quantity takeoffs for any type of intervention on the territory.
Try nowWhat is CAD&Pillar?
The software is provided with an integrated video course. 90% of our customers learn to use the software with this simple tool. The reduction in the costs and time devoted to learning is significant.
CAD&Pillar is commercially offered divided into 5 modules, freely combinable with each other.
The new release 10.0 is now available!
CAD&Pillar 10.0 comes with the new graphics engine compatible with 64-bit AutoCAD 2024.
Learn moreAre you looking for a complete software that is easy to use?
AutoCAD’s graphical interface makes it immediate to use the technical features for:
Land cadastre procedures
Tachymetric surveys, levelling, GPS, laser scanning
River engineering works
Design and management of quarries and landfills
Road design
Map georeferencing
Facade surveys from photographic images
Import/Export functions (Google, GIS)
Module T - Topography
This module is dedicated to the processing, rendering, and cartographic layout of any type of survey.
- georeferenzia cartografia raster, foto aeree e satellitari, mappe catastali
- scarica dati da tutti gli strumenti
- gestisce i dati di campagna permettendo di unire rilievi, gestire letture e stazioni, GPS
- gestisce il libretto a 360°, coordinandolo con la rappresentazione del rilievo
- genera monografie di punti
E per quanto riguarda le pratiche del Catasto Terreni:
- legge e crea .DAT per PREGEO
- facilita la creazione dell'autoallestito e della proposta di aggiornamento
- genera facilmente i frazionamenti
- gestisce le mutue distanze catastali
Il software fornisce funzionalità avanzate per il calcolo dei rilievi. Ad esempio, riconoscimento automatico di intersezioni in avanti e indietro, aperture e chiusure a terra, calcolo strati, compensazioni empiriche e ai minimi quadrati, rototraslazioni con e senza variazione di scala, calcolo integrato con baseline GPS, compensazioni di reti, controllo delle proiezioni su sfera locale.
Ti permette di calcolare e gestire livellazioni trigonometrica e geometrica con un calcolo empirico e ai minimi quadrati.
Il tuo controllo sui rilievi è totale perchè il software fornisce report che indicano ogni singolo passaggio che esegue.
I dati che arrivano da GPS possono essere subito impiegati nell'elaborazione dei rilievi e visualizzati in tempo reale. E la trasformazione di coordinate? è di facile gestione perchè puoi definire i sistemi cartografici e geoidici di riferimento e far eseguire al sofwtare il passaggio di sistema di riferimento avendo sempre tutti i parametri sotto controllo.
Devi creare un sistema locale? con la stessa interfaccia definisci i tuoi sistemi di riferimento e trasformi le coordinate quando ne hai bisogno.
- associazione automatica al codice punto di un simbolo o figura
- disegno automatico delle discontinuità rilevate
- disposizione dei testi ottimizzata per evitare sovrapposizioni nel disegno del rilievo
- disegno automatico del reticolo cartografico
Module M - Models
This module is used to create a digital terrain model, using triangles, contour lines, or a regular grid, which is necessary for calculating profiles and sections for the purpose of calculating material movements.
- gestire piani quotati
- creare modello del terreno partendo da rilievi celerimetrici o da cartografia 3D
- calcolare sezioni e profili
- calcolare i volumi di sterro e riporto con i metodo delle sezioni ragguagliate e mediate
- operazioni booleane sui modelli digitali
- creare modelli virtuali per pubblicarli su internet
- calcolare l'estensione delle superfici di modelli 3D
- sfruttare lfunzionalità per il ricalcolo automatico di profili e sezioni
Per avere la garanzia che il modello dello stato di fatto sia una fedele rappresentazione definisci le linee di discontinuità come muri, marciapiedi, scarpate, ecc: il software nè terrà conto durante la modellazione.
Sfrutta il formato di interscambio dati LandXML. Cos'è LandXML?
E crea report personalizzati, resoconti sulle verifiche normative o file di tracciamento con le procedure dedicate.
Se devi gestire più di due modelli nello stesso dwg, se vuoi definire più di un tracciato o calcolare più di 10 articoli di computo nelle sezioni passa alla soluzione Cave e Discariche di CIVIL Design: se sei già cliente di CAD&Pillar, pagherai solo la differenza di prezzo e così ti viene sempre riconosciuto l'investimento fatto.
Module S - Streets
This module provides everything you need to design and calculate a road. It verifies in real time the requirements of Ministerial Decree 5/11/2001. It saves money and users can benefit greatly from the automatic recalculation of profiles, sections, and regulatory checks following changes made to the route.
Non spaventano, perchè il progetto è dinamico ed eventuali cambiamenti, anche in fase avanzata, attivano gli aggiornamenti automatici di planimetria, modelli e sezioni. Puoi risparmiare tempo e valutare diverse ipotesi progettuali con il minor dispendio di energie possibile.
Le procedure per eseguire le verifiche normative per le progettazione stradale, sono ormai consolidate da tempo: criteri compositivi dell'asse, diagramma di velocità e verifiche di visibilità vengono eseguite in modo veloce ed accurato.
Il modulo strade permette di:
- creare un asse con composizione qualsiasi come rettifili, clotoidi, parabole, archi, ecc
- calcolare rotazioni ed allargamenti
- calcolare sezioni e profili
- inserire automaticamente sezioni di progetto parametriche
- contabilizzare i movimenti di materia
- creazione automatica della planimetria di progetto
- ottenere un modello 3D della strada progettata
- produrre filmati di percorrenza
- controllare i franchi in galleria
- gestire profili di acquedotti e fognature
- gestire anche tracciati ferroviari
Le opzioni che sono state inserite permettono un'ampia personalizzazione dei parametri alla base delle verifiche come coefficienti di aderenza, velocità di progetto da usare, altezza degli ostacoli e altro ancora.
Se devi progettare intersezioni stradali o interventi di maggiori dimensioni che richiedono più di un tracciato passa alla soluzione Strade e Ferrovie di CIVIL Design: se sei già cliente, pagherai solo la differenza di prezzo e così ti viene sempre riconosciuto l'investimento fatto.
Module C - Quarries
This module allows you to design and manage 3D digital models, typically quarries and landfills. It calculates volumes using the prismoid method and allows you to define levelling.
Il metodo più preciso per la valutazione dei volumi definiti tra diversi modelli è quello dei prismoidi che è la peculiarità di questo modulo: report personalizzabili e rappresentazioni delle entità in gioco vengono forniti dal software con poco sforzo.
Calcola la superficie 3D complessiva dei triangoli di un modello 3D, utile per computare articoli di tipo area come l'inerbimento, lo spritz beton, ecc.
Quello dello spianamento è un tema tipico: puoi definire il piano secondo diversi dati in input come le coordinate di 3 punti, 2 punti e una direzione, 1 punto e la retta di massima pendenza, ecc. Poi, si calcola il volume compreso tra questa superficie di progetto e il modello dello stato di fatto, chiamato "terreno" e si ottengono i report o le rappresentazioni grafiche desiderate.
E' spesso necessario calcolare il piano di compenso, ovvero il piano ideale che consente di eguagliare sterri e riporti facendo riferimento ad un modello di terreno dato.
Le intersezioni tra modelli sono individuate in automatico e prestarsi a diversi scopi.
Avendo a disposizione modelli digitali a triangoli è possibile eseguire diverse analisi, di solito per produrre mappe tematiche:
- altimetrica, che evidenzia i triangoli in base alla quota del baricentro ed è utile per evidenziare le differenze di quota
- cliviometrica, che colora gli stessi secondo range di pendenza, necessarie per valutare diverse soluzioni progettuali
- esposizioni, che mette in luce la variazione della pendenza dei triangoli rispetto ad una data direzione, per ottimizzare ad esempio la sistemazione del terreno di colture agricole
Se devi gestire più di due modelli nello stesso dwg, se vuoi definire più di un tracciato o calcolare più di 10 articoli di computo nelle sezioni passa alla soluzione Cave e Discariche di CIVIL Design: se sei già cliente di CAD&Pillar, pagherai solo la differenza di prezzo e così ti viene sempre riconosciuto l'investimento fatto.
Il modulo permette di generare scarpate di progetto scegliendo la pendenza, la quota di piede e sommità ed inserendo anche banche.
Module R - Raster
This module enhances raster image management. Local projects always require the use of raster maps, such as regional technical maps, orthophotos, satellite photos, or cadastral maps. In architecture, it is often very useful to survey buildings by straightening photographs to obtain metric information.
Permette di unire immagini diverse aeree e terrestri. E' utile il clipping automatico dell'immagine sul minimo poligono convesso contenente i punti usati per la trasformazione affine o prospettica.
E' la funzione per sovrapporre una mappa ad un rilievo o viceversa. Sono disponibili due opzioni, con o senza variazione di scala. Sono previsti automatismi per lettura dei parametri da file .TFW, .COO, .RCW ...
Cancella o colora aree interne a polilinee o cerchi e trasporta o cancella linee, punti, archi, cerchi, polilinee 2D/3D, 3DFace e spline sull'immagine.
- importa ortofoto con formato .ASC
- gestisce immagini RGB, indicizzate, bianco e nero, scale di grigio
- proietta immagini su modelli a triangoli
- crea il file di georeferenziazione TFW a partire dall'immagine inserita
Con questo modulo, CAD&Pillar ti permette di gestire qualsiasi formato di immagini!
Inserire le mappe e correggere gli errori introdotti dalla scansione, ed al tempo stesso portare alle coordinate reali? Si può fare con ortofoto, Carte Tecniche Regionali o catastali!
- georeferenziare anche le entità vettoriali che compongono i normali progetti e disegni
- sovrapporre progetti CAD, quindi vettoriali, su foto aeree ed creare anche un'immagine finale di unione
Questa funzione permette di restituire facciate di edifici in CAD in modo automatico ed anche di vestire i modelli 3D con le immagini scattate. La risoluzione è mantenuta inalterata per non perdere dettagli.
Con tale trasformazione è possibile far coincidere due cartografie non perfettamente sovrapponibili come, ad esempio, quella catastale con una di origine aerofotogrammetrica.
System requirements
for installation
- Operating systems: Microsoft® Windows 11, 10 (version 1809 or later) 64-bit
- Processor: 2.5–2.9 gigahertz (GHz), 3–4 GHz recommended. ARM processors are not supported
- RAM: 8 GB (32 GB recommended)
- Screen resolution: 1920x1080 with True Color.
- High Resolution & 4K Displays: resolutions up to 3840 x 2160 (with a dedicated graphics card)
- Disk space for installation: 10 GB (SSD recommended)
- .NET Framework: Version 4.8 or later
Digicorp Ingegneria S.r.l. YouTube Channel
Production and sale of software for the design and accounting of infrastructures (roads, railways, hydraulic works, topography). Technical design and consulting services.
WatchFAQ
The software is used every day by thousands of technicians working in the field, in particular surveyors, design firms, and contractors.
The software comes with online help and an integrated video course that corresponds to a basic course delivered by our technicians.
An average AutoCAD user with the necessary technical skills can start being operational right away because the approach is the same as drawing in AutoCAD. In this way, the time (and costs) related to the learning period are minimized. For advanced needs, courses of varying duration are available at our premises or at the customer’s site. For more information, please contact our sales department.
The entire project (of any size) is saved in a single DWG without having to rely on external databases. This makes it possible to always keep project data aligned and under control. By delivering the DWG to third parties, you can be sure you have provided everything needed. With the latest versions of the DWG extension, file sizes have been significantly reduced, improving lightness and ease of sharing.
Yes, because the program creates only CAD entities without the need for special files. Only for the correct display of topographic points, a shape file (CD-PUNTO.shx) is provided, to be copied into the AutoCAD fonts folder on the recipient’s computer. You can edit or integrate the projects created with the program using any AutoCAD.
CAD&PILLAR allows you to automatically build the 3D model of the linear work with a dedicated command. You can then integrate or modify this linear 3Dface model both with other commands and with AutoCAD commands. Additional commands have been developed to create presentations and videos.
An alignment created with CAD&PILLAR is a 2D polyline drawn at elevation zero in AutoCAD model space. The polyline retains all the characteristics of any AutoCAD polyline, to which the program implicitly associates design data such as chainages, rotations, etc.
An alignment is generated starting from the “basic elements”, i.e., AutoCAD line, arc and circle entities, and from the blocks generated by the program for building transition curves (parabolas and clothoids, including multi-parameter, inflections and continuity, polycentric curves, spirals...). The program setup allows you to proceed with the plan layout phase both by polygonal and by circles.
There are specific commands for editing alignments, but starting from version 4 it will be possible to edit the alignment dynamically both graphically and by working on a table that lists the alignment elements.
The program is single-axis. CIVIL Design, on the other hand, is available in both single-axis and multi-axis versions.
The program allows you to perform all checks for the design of extra-urban roads required by Ministerial Decree 5/11/2001. In particular, it performs alignment composition checks, speed diagram checks, and two-dimensional visibility checks. The program allows you to generate reports and the required drawings/documents.
A design cross-section in CAD&PILLAR is created by simply drawing in AutoCAD. In fact, you just need to draw polylines to represent the current section and the marginal elements (ditches, gutters, walls...), and the program will insert them into the design cross-sections based on the specified conditions. It is possible to define parametric sections to create complex design cross-sections that are inserted based on certain conditions.
10 volume items and 2 area-type items.
With CAD&PILLAR version 3, dynamic sections were introduced with respect to changes made in plan, profile, or other project elements. For example, already inserted design sections update dynamically if the platform plan has been modified, or if the design profile has been modified, or again if the design section has been modified. This is complemented by the dynamic update of slope/bench elevations.
The program allows you to automatically create quantity cross-sections, the section book, and report files of the computed quantities.
The program allows you to create digital models based on contour lines, triangles, or a regular grid. You can then extract a longitudinal profile of an alignment and place it in a title block; more generally, you can extract profiles along any polyline.
It is possible to manage two profiles for each alignment (existing ground and design).
The program allows you to size vertical curves of road profiles while complying with the visibility checks required by regulations.
The program allows you to process and manage tacheometric surveys of any size, cadastral surveys, GPS, and levelling.
Files can be downloaded from the instrument to the PC with our freeware Transfer software (available in this website’s download area). CAD&PILLAR allows you to import and process these files. Trimble-Geotronics, Leica, Nikon, Sokkia, Pentax instruments are supported, as well as Trimble DINI levels.
Processed surveys are represented as 3D spot-level plans in AutoCAD: points are special blocks that can be managed with dedicated commands designed to ensure maximum flexibility in annotation/styling.
CAD&PILLAR allows you to process a survey using different adjustment methods: constrained least squares, empirical, with roto-translation, or no adjustment. Among the many calculation options, we mention the possibility to perform checks on the defined traverses.
The T - Topography module of CAD&PILLAR is compatible with Pregeo 10 and earlier versions.
CAD&Pillar is divided into 5 modules (T - Topography; M - Contours and Volumes; S - Roads; C - Quarries; R - Raster). The user can choose which modules to purchase and how to combine them. There are special commercial offers that propose multiple modules at a decidedly advantageous price. For a description of the modules, use the side menu.
The product is offered through commercial Solutions that represent groupings of commands tailored to different technical needs. The Solutions are designed to provide the most suitable answer for different application areas. For example, there is the Topography Solution, which provides all the commands needed for processing and styling topographic surveys of any kind; or the QUICK Roads Solution, created for single-axis road design, while for more specific needs the Roads and Railways Solution has been tailored with additional functions and the possibility of multi-axis management. The description of the solutions is shown in the Products section on the side.
CAD&PILLAR can be considered a light version of CIVIL Design for more limited design needs, particularly suitable for topographic (including cadastral) work, the construction site environment, or small to medium design firms.
First of all, a distinction must be made between Service Packs and new Releases. The former are updates that can be downloaded for free from this website’s download area and include corrective patches and small improvements to existing commands, while upgrading to new releases is paid and includes new features and the development of existing commands.
It is a contract that can be signed with DIGICORP Ingegneria Srl to receive technical support by phone during certain hours. The contract can only be subscribed to if you own the latest version of the software.
This is a service offered by DIGICORP Ingegneria Srl for technical assistance on its products. Technical assistance can be requested by telephone, fax, or email in accordance with the terms of the aforementioned contract. The purpose of the assistance service is to guarantee the customer (at the times and in the manner established) the provision of useful information to overcome difficulties encountered in using the program (difficulties that cannot be overcome by the user with normal diligence). The service is free for the first six months after purchase. After this period, the service can be extended for a fee by signing the Support contract. The technicians in charge are civil engineers specializing in various disciplines: road and railway design, topography, hydraulics, planning, and construction site management.Translated with DeepL.com (free version).
Do you need help?
If you have any questions about the software, don't hesitate to contact us. We would love to help you without hesitation.